Why the EPS pelletizer machine request two heating zones

Why the EPS pelletizer machine request two heating zones?

In this page, we discuss the reason why the EPS pelletizer machine requires two heating zones.

Suit for EPS machine

Description

We will explain why we need two heating zones for the EPS pelletizer machine

  • 1st extrusion stage
  • 2nd extrusion stage.
Why the EPS pelletizer machine requested two heating zones

Due to the EPS waste density differences themselves, the EPS waste that has only been heated in the first stage cannot reach a uniform state and is 100% well melted. After the second-stage extrusion, the density of the melted EPS waste will become more uniform and soft, making it easier to pull and cut into PS plastic granules.

So in the actual operation process, the speed of the second-stage extrusion needs to be adjusted in real time based on the speed of the first-stage extrusion.

For example: if the extruded PS material is thin, the speed of the second-stage extrusion should be slow; if the extruded material is thick, the speed of the second-stage extrusion should be fast. However, the speed of the first-stage extrusion cannot be adjusted. The size of the silo feed can be manually adjusted by the opening degree of the metal plate.

Video

Leave a Message