Platform horizontal foam cutting machine for XPS and EPS with manual wire setting and control cabinet

Horizontal Foam Cutting Machine for XPS and EPS

This platform-type horizontal foam cutting machine slices XPS and EPS foam into sheets for packaging pads and waterproof backer-board cores. The cutting-board specification is 2,000–6,000 mm in length, with customization available, and up to 1,230 mm in both width and height.

The configuration uses manually positioned and hung cutting wires, a copper-bar wire-setting structure and variable-frequency speed control. Send EPSTEC your foam density, board size and required finished sheet thickness to discuss the configuration for your process.

Horizontal Foam Slicing for XPS and EPS

Horizontal Slicing for XPS and EPS Foam

The machine cuts XPS and EPS foam horizontally into sheets. Applications include packaging pads and foam cores used in waterproof backer boards. For backer-board production, the confirmed processing stage is the foam core before facing or coating; this is not a facing, coating or waterproofing machine.

Match the Configuration to Your Board Size

The specified cutting-board length is 2,000–6,000 mm, with customized lengths available. Board width and height are each up to 1,230 mm. Specify the starting board dimensions and required finished sheet thickness separately: the board-height limit is not a stated minimum or maximum finished sheet thickness.

The workshop photographs show a long support platform, a cutting frame and a separate control cabinet. This platform-type layout differs from EPSTEC’s belt-conveyor XPS cutting machine. Review loading, support, unloading and workshop space when selecting the configuration.

Manual Wire Setting with a Copper-Bar Structure

Cutting wires are positioned and hung manually. The wire-setting structure uses copper bars for electrical conduction; automatic wire setting is not included. The wire-heating system combines a voltage-regulation module and a transformer.

Discuss the required sheet thickness, wire arrangement and thickness-change procedure before ordering. Finished sheet-thickness range, tolerance and changeover time should be confirmed for the intended material and configuration.

Variable-Frequency Speed Control

The drive speed can be adjusted through a variable-frequency drive according to foam density. This provides an adjustable operating speed for the slicing process. Agree the speed settings and cutting acceptance criteria for the XPS or EPS grade to be processed; no numerical speed, output or precision is stated in the available specification.

Sliding-Contact Main Power Supply

The main power supply uses a sliding-contact conductor-line arrangement rather than relying on a trailing floor cable for machine travel. Confirm the site’s electrical supply, installation arrangement and applicable electrical requirements for the quoted configuration. The supplied information does not establish a supply voltage, safety certification or quantified safety rating.

Information for a Cutting Assessment

Provide the material, foam density, starting board dimensions, finished sheet thickness, thickness tolerance and target output. Include photographs or samples if board surfaces are uneven. For backer-board cores, specify the requirements of the downstream facing or coating process so the cutting criteria can be agreed.

Features for Your Cutting Configuration

  • Horizontal XPS/EPS slicing: For foam sheets used in packaging pads and waterproof backer-board cores.
  • Board-size specification: Length 2,000–6,000 mm with customization available; width and height each up to 1,230 mm. Confirm the configuration for the ordered board size.
  • Manual copper-bar wire setting: Wires are positioned and hung manually; automatic wire setting is not included.
  • Voltage-regulated wire heating: A voltage-regulation module and transformer supply the cutting-wire heating system.
  • Variable-frequency drive: Adjust the operating speed according to foam density and the agreed cutting conditions.
  • Sliding-contact main power supply: A conductor-line arrangement supplies power during travel. Site electrical requirements remain part of the configuration review.

Technical Parameters

Parameter Confirmed information Notes
Processed materials XPS and EPS foam Specify material and density.
Cutting operation / layout Horizontal slicing / platform type For foam-sheet preparation.
Cutting-board length 2,000–6,000 mm; customization available Confirm the ordered length and machine configuration.
Cutting-board width Up to 1,230 mm Incoming board dimension, not sheet thickness.
Cutting-board height Up to 1,230 mm Incoming board dimension, not a finished sheet-thickness range.
Wire setting Manual wire positioning and hanging; copper-bar structure Automatic wire setting is not included.
Cutting-wire heating Voltage-regulation module and transformer Heating power and electrical rating to be confirmed.
Speed control Variable-frequency drive; adjusted according to foam density No numerical speed or output is specified.
Main power supply arrangement Sliding-contact conductor line Confirm site supply and final installation requirements.
Applications Packaging pads and waterproof backer-board foam cores Backer-board core stage before facing or coating.
Pictured cabinet controls Cutting-speed adjustment, cutting-wire power controls and emergency stop Photographic reference; agree the final controls in the quotation.
Drawing reference overall dimensions, L × W × H 6000 × 1760 × 2559.66 mm XPQ1300.DWG general-arrangement reference only; these are not cutting-board dimensions and do not define every customized configuration.
Drawing reference platform height 780 mm As dimensioned in the end view; confirm the final configuration.

Finished sheet thickness, tolerance, output, electrical rating and supplied accessories should be agreed for the required configuration.

Workshop and Control Details

Photographs show the platform, cutting gantry and control cabinet. The final supplied arrangement is defined by the agreed configuration.

Platform-type horizontal foam cutting machine for XPS and EPS in the workshop
Side view of the foam cutting platform and yellow cutting frame
Control cabinet with cutting wire power controls and emergency stop

General Arrangement Drawings

The supplied drawing shows a side view, an end view and a top view. Its overall dimensions are installation-layout references for this drawing version, separate from the specified cutting-board sizes.

General arrangement with side, end and top views
Side view showing 6000 mm overall length and 2559.66 mm overall height
End view showing 1760 mm overall width and 780 mm platform height
Top view of the machine platform and cutting frame

3D Assembly Views

Six orthographic design views show the platform and cutting frame, using the viewer’s front, back, left, right, top and bottom directions. These are rendered model views; model colours do not define the final paint finish.

Front orthographic model view of the platform horizontal foam cutting machine
Back orthographic model view of the platform horizontal foam cutting machine
Left orthographic model view of the platform horizontal foam cutting machine
Right orthographic model view of the platform horizontal foam cutting machine
Top orthographic model view of the platform horizontal foam cutting machine
Bottom orthographic model view of the platform horizontal foam cutting machine

Applications and Buying Questions

For factories slicing XPS and EPS foam into packaging pads or preparing foam cores for waterproof backer boards. Define the required sheet thickness, foam density and acceptance criteria for the downstream process.

For backer-board production, facing, coating and waterproofing are separate stages; processing finished composite boards has not been established for this configuration.

Frequently Asked Questions

Can this machine process both XPS and EPS?

Yes. Both materials are within the confirmed application. Provide the foam grade, density and starting board dimensions for configuration review.

What board sizes are specified?

Cutting-board length is 2,000–6,000 mm with customization available. Width and height are each up to 1,230 mm. Confirm the ordered machine configuration against the board size; the height limit does not describe finished sheet thickness.

How are the cutting wires set and heated?

Wires are positioned and hung manually using a copper-bar wire-setting structure. Heating is supplied through a voltage-regulation module and a transformer. Automatic wire setting is not included.

Can the cutting speed be adjusted?

Yes. A variable-frequency drive allows speed adjustment according to foam density. The operating settings should be agreed for the intended material and cutting requirements.

How does it differ from the belt-conveyor XPS cutting machine?

This product uses a platform-type structure. Compare the layouts against your board dimensions and loading/unloading requirements. View the belt-conveyor XPS cutting machine.

What information is needed for a quotation?

Provide foam material and density, starting board dimensions, required sheet thickness and tolerance, target output, electrical supply and workshop layout. Include photos or samples where useful.

Discuss Your Foam-Sheet Cutting Requirements

Send EPSTEC your XPS or EPS board details and the sheet specifications required by your packaging or backer-board process. We can discuss the platform layout, wire setup and electrical configuration against those requirements.

Container Loading References

The source photographs show wrapped equipment and packed items in a shipping container. Confirm the packing method, shipment dimensions and supplied items for your order.

Wrapped platform-type foam cutting machine secured inside a container
Wider container view of the platform cutting machine and packed items
Loading reference showing the machine and wrapped items inside a shipping container

Discuss Your Foam-Sheet Cutting Requirements

Send EPSTEC your foam material and density, board dimensions, sheet thickness and tolerance, target output, site electrical supply and workshop layout.

Leave a Message

Loading inquiry form… You can also email [email protected].