Open T-shaped ICF block mold with green forming sections and silver frame

EPS Mold for T-Shaped ICF Blocks

EPSTEC supplies EPS molds for T-shaped ICF blocks used at wall intersections. This ICF T-block mold project is supported by component CAD views, an EPS sample photograph and a workshop photograph of the tooling. Share your junction drawings, connecting tie details and EPS molding machine information to discuss the mold requirements.

Description

Tooling for a T-Junction

A T-shaped ICF block forms the junction where a branch wall meets a continuous wall run. The supplied design views show the branching concrete cavity, connecting ties and interlocking edges. The EPS sample photograph provides a separate reference for the molded component.

This page covers the production mold. Finished EPS blocks and connecting parts should be specified separately when defining the supply scope.

Define the Branch Position and Mating Geometry

The branch position is a key part of the tooling brief. Provide the lengths on both sides of the junction, the branch projection, block height, foam panel thickness and concrete cavity width. Include dimensioned views of the junction profile.

Supply the adjacent straight-block drawings so that the end connections and interlocking edges can be reviewed together. Do not rely on overall dimensions alone when checking whether the blocks belong to the same wall system.

Coordinate Connecting Ties and Mold Layout

The sample and CAD views show connecting elements between the foam panels, including the junction area. Send the tie drawings and required positions with the block model. These details inform the review of insert placement, mold access and the intended demolding sequence.

Confirm which components are to be molded together and which are assembled afterward. The final mold arrangement and cavity layout should follow the approved production drawings.

Match the Tooling to the Production Machine

Provide the EPS molding machine make and model, mounting interface, available opening space and utility connections. Include filling, steam, cooling and ejection requirements for review. Compatibility with a particular machine must be checked for the individual project.

Send a Complete Inquiry

For an initial tooling discussion, send:

  • A dimensioned T-block drawing and the current 3D model, with revision identification.
  • Drawings of adjacent blocks and connecting ties.
  • The required EPS specification, target density and acceptance criteria.
  • Machine interface drawings and the intended production arrangement.
  • The requested supply scope and delivery destination.

Buyer Questions

Is this the same mold as a straight or corner block mold?

This project addresses a T-junction component. Straight-block and 90-degree corner designs have different geometries and should be reviewed as separate tooling requirements.

Can this block connect to our existing ICF system?

Share the mating block and tie drawings. Connection details, panel spacing and junction geometry need to be reviewed before compatibility can be confirmed.

What do the reference images show?

The CAD views illustrate the intended component geometry. The white EPS sample shows the molded block arrangement, while the green tooling photograph shows the mold. They serve different purposes in a technical review.

For an overview of related tooling, see our EPS ICF block mold page.

Features

  • T-junction component geometry: A dedicated page for the branching wall connection helps buyers identify the required tooling type.
  • Component and tooling references: CAD, an EPS sample and a mold photograph support review of both the target part and the production tooling.
  • Visible ties and interlocking edges: The reference images identify connection details that should be included in the project drawings.

Product Information

Tooling type: EPS mold.

Intended component: T-shaped insulated concrete form block.

Project references: Two CAD images, an EPS sample photograph and a mold workshop photograph.

Final dimensions, cavity arrangement and machine interfaces: To be defined by the approved project drawings.

Product Photos

Use the following photographs to review the tooling and component references. Confirm the required dimensions and supply scope from your project drawings.

Open mold forming sections for the T-shaped ICF block

Open mold forming sections for the T-shaped ICF block.

Metal frame and green forming surface at the T-junction

Metal frame and green forming surface at the T-junction.

T-junction forming sections viewed obliquely

T-junction forming sections viewed obliquely.

Forming ribs and edge details of the T-block mold

Forming ribs and edge details of the T-block mold.

Interlocking edge details inside the T-shaped mold

Interlocking edge details inside the T-shaped mold.

Inner mold surfaces at the T-junction

Inner mold surfaces at the T-junction.

End forming surface of the T-shaped mold

End forming surface of the T-shaped mold.

Top view of the T-junction forming layout

Top view of the T-junction forming layout.

Upright mold half with T-junction forming geometry

Upright mold half with T-junction forming geometry.

White EPS T-junction block sample with connecting ties

White EPS T-junction block sample with connecting ties.

CAD Design References

Component views show the intended molded part; mold assembly views show the tooling arrangement. The supplied CAD images include reference variants, so final dimensions and compatibility should be checked against the approved drawing for your order.

CAD reference of a T-shaped ICF block

CAD reference of a T-shaped ICF block.

Alternate CAD reference of the T-junction block

Alternate CAD reference of the T-junction block.

CAD assembly of the T-shaped ICF mold

CAD assembly of the T-shaped ICF mold.

CAD forming layout of the T-junction mold

CAD forming layout of the T-junction mold.

Project Reference Videos

These EPSTEC videos provide project references for the illustrated ICF tooling. A trial on a particular machine does not establish compatibility with every machine of that brand; submit your machine interface details for review.

Straight and T Type ICF Molds Design Requirements Explained

T shaped ICF molds running on a HIRSCH machine

Application

For ICF block manufacturers and EPS molding factories sourcing tooling for T-shaped wall junction components. Review the junction design together with the adjoining block system, connecting parts and production equipment.

Send the current drawings and machine details to discuss your tooling project.

Leave a Message

Loading inquiry form… You can also email [email protected].