Central Vacuum System

Central Vacuum System

Description

  • Central Vacuum System only works for the EPS shape molding machine factory, not suit for the EPS block molding machine factory.
central vacuum system for EPS machine

Feature:

  • We suggest using the vacuum central system if have more than 3 sets of EPS shape molding machines.
  • It can save up to 30-35% of energy.
  • The more EPS shape molding machine, the better result both on EPS finally quality and cost-saving.

Under manufacturing photo

Central vacuum system
Central vacuum system
Central vacuum system
Central vacuum system
Central vacuum system
Central vacuum system
Central vacuum system
Central vacuum system

In production

EPS machine central vacuum system

EPS machine central vacuum system

EPS machine central vacuum system

EPS machine central vacuum system

What is central vacuum system?

Separate the EPS mold cooling by water cooling and vacuum cooling. Adopt an efficient central vacuum system instead of an individual vacuum pump on each machine, the central vacuum system to vacuum cooling the EPS foam products as the main, at the same time consider water cooling as a supplement, this will greatly improve the efficiency.

Vaccum pressure :-0.6 to -0.75bar

Advantage:

  • Low water content
  • It can reduce dry time stay in the dry room or even without any dry room
  • Save steam consumption
  • Increase productivity
  • The EPS foam product surface is smoother
Central vacuum system

Application

center vacuum system for EPS machine
center vacuum system for EPS machine
center vacuum system for EPS machine
center vacuum system for EPS machine
center vacuum system for EPS machine
Central vacuum system
Central vacuum system

Central Vacuum System Workshop View

See the vessels, control cabinet and three-pump arrangement of a central vacuum system in the workshop. This example shows the physical equipment layout for an EPS shape molding plant.

Working Video in EPS foam factory

FAQ

Yes,it is. it’s a mature product in China, most of EPS packaging factory installed the central vacuum system to save the steam and energy.

By using the central vacuum system to generate stable negative pressure between -0.55 to -0.75bar  to help reduce the cooling time than vacuum tank from the single EPS shape molding machine to save each cycle speed and save steam.

For EPS styrofoam factory who owned more than 3 piece of EPS shape molding machine

It’s depended on the quantity of EPS shape molding machine, EPS foam products’ shape and capacity, but generally speaking, it can saving energy about 30-40% which a lot.

The size of the vacuum pump and vacuum capacity depends on the EPS raw material consumption, EPS shape molding machine size, EPS shape molding machine quantity, please contact us, our EPS machine expert will answer all your question.

Sure, please contact us, our EPS machine expert will answer all your question.

  • Low water content, it can reduce dry time in the dry room
  • Save steam
  • Increase productivity
  • The EPS foam product surface is smoother

Have more questions? We LOVE questions! Just contact our support team and we’ll be happy to assist!

Leave a Message