Automatic Storage System

Automatic Storage System

Description

The automatic storage system design for EPS expanded polystyrene block factory, the whole storage system was controlled by PLC & Touch Screen, sensors and pneumatic cylinder, driven by motor and chains.

Feature:

  • While one line is full, the system would stop feeding this line and automatically switch to feed another line.
  • While one line is empty during discharge, the system would stop discharge this line and automatically switch to discharge another line.
  • It works with the continuous EPS cutting line to increase EPS plant automation & reduce labor work strength.
  • Adjustable chain conveying speed

Application

Automatic Storage System for EPS block

Automatic storage system for EPS block

Automatic Storage System for EPS block

Automatic storage system for EPS block

Automatic storage system for EPS block

Automatic storage system for EPS block

Automatic Storage System for EPS block

Automatic Storage System for EPS block

EPS block automatic storage system
automatic storage line for EPS block

Working video

FAQs

1. The automatic drying room adopts the combination of roller transmission and chain transmission, and the program is automatically controlled so that it can reach the fully automatic in and out of the board.

2. Adopting an intelligent drying room temperature control system, which can make the drying room temperature automatically controlled between high and low temperature, and the heating valve automatically opens when the temperature is lower than a set value.

When the temperature is higher than a set value, the heating valve is automatically closed. Effectively ensure the temperature of the drying room at the same time, greatly reducing the energy consumption of the drying room. At the same time also has the drying room up and down temperature difference is too

When the temperature difference between the upper and lower parts of the drying room is too large, the circulation fan will be started to make the temperature in the drying room balanced as soon as possible.

3.The door of the drying room is designed with full automatic opening and closing (the door will open automatically when the sheet reaches the door and close when it enters completely).

4. This equipment can be customized according to the actual situation of the factory, which can greatly reduce the labor cost and labor intensity.

Leave a Message