
Automatic AC voltage regulator
Main usage and application
Automatic AC voltage regulator It is made up of contacting voltage regulator, an automatic controlling circuit, and a servo motor. When Mains voltage instability or load fluctuates, the automatic controlling circuit will sample, amplify and then control the servomotor to drive the rocker arm and brush to rotate in the required direction and adjust the output voltage to the rating to stabilize the voltage.
Description
Normal working conditions and installation conditions
- Ambient temperature: -5℃~40℃.
- Relative humidity: not more than 90% (temperature is 20℃).
- The altitude of the installation site should not exceed 2000m.
- The installation environment should be well ventilated and free of obvious dirt, corrosive gases, dust, combustible materials and combustible gases.
- Installation site without shaking and shock vibration.
- Indoor use, the output between the voltage regulator can not be used in parallel.
- The waveform of the power supply voltage is a sine wave.
- Three-phase voltage regulator product input must be connected to the zero line to work properly
Parameters
- Product Model: TNSI series
- Trade name: three-phase automatic AC voltage stabilizer
- Frequency: 50/60HZ
- Adjustment time: <6S (when the input voltage changes 20V)
- Input voltage: 280V a 430V
- Output voltage: phase voltage 220V ± 4% Line voltage 380N ± 4% (three-wire four-phase system)
Photo



-
Full power coil
-
Long-lasting
-
Evenly packed
-
More conductive
-
Lower resistivity

-
Wear-resistant carbon brush
-
Not easy to break
-
The voltage stabilizer is used for a long time

-
Smart chip
-
Integrated circuit
-
Welded firmly
-
Fast and accurate response

-
Flame retardant enclosure
-
Rapid heat dissipation
-
High strength flame retardant iron shell
-
There are cooling holes on both sides
-
Effectively dissipates internal temperature
Application
Application
TND1/TNS1 series automatic AC voltage regulator is composed of a contact regulator and automatic control circuit. The voltage signal is sampled
sample, amplify and then control the servo motor to drive the arm and brush rotation in the desired direction so that the output voltage is adjusted to the rated value and achieves the purpose of voltage stabilization.
The output voltage is adjusted to the rated value to achieve the purpose of voltage stabilization.
The voltage regulator can be widely used in industrial production, scientific research, medical and health, household appliances, and other grid voltage fluctuations or grid
Voltage fluctuations or continuous low or high-voltage areas can provide quality power to the load.
Comply with the standard: Q/ZT 78.
Package
Delivery
Leave a Message





