
How to Solve the Problem of Yellowing at the EPS Filling Gun?
Yellowing at the EPS filling gun of the EPS foam box product can be caused by moisture in the air compressor, accumulated water inside the machine, or poor quality of circulating water. Solutions include maintaining the air compressor to prevent moisture, ensuring the machine is dry and clean, and purifying the circulating water with a descaling agent.
Suit for EPS machine
- EPS filling gun
Description
How to Solve the Problem of Yellowing at the EPS Filling Gun
Our customer has reported to us that the EPS filling gun of the EPS foam box product sometimes shows yellowing. We guess that the material at the EPS filling gun of the EPS foam box product may have been oxidized or contaminated to some extent. Below are detailed explanations of the causes of these phenomena and corresponding improvement measures:
- Air compressor has water: If there is moisture in the air compressor, it may cause the material to yellow when sprayed.
Solution:
- It is necessary to check and maintain the air compressor to ensure its normal operation and prevent moisture from entering the foam material.
- Accumulated water inside the machine: If there is accumulated water inside the machine, it may also cause the EPS filling gun of the foam box product to be contaminated or oxidized.
Solution:
- It is very important to ensure the inside of the machine is dry and clean.
- Poor quality of circulating water: If the quality of circulating water is not good, contains impurities or pollutants, it may cause the foam box product to yellow.
Solution:
- Adding a descaling agent can purify the quality of circulating water and ensure the purity of the sprayed material.
Photo

Leave a Message





