How to solve EPS foam product surface shrinkage for EPS shape molding machine?

How to solve EPS foam product surface shrinkage for EPS shape molding machine?

Surface shrinkage in EPS foam products can be caused by overly long steam heating time, rapid cooling speed, unevenly distributed feed, insufficient mold locking force, and excessive foaming ratio. Solutions include controlling temperature and cooling speed, checking and adjusting feed distribution, increasing mold locking force, and adjusting the expanding ratio.

Suit for EPS machine

Description

Below are detailed explanations of the causes of EPS foam product surface shrinkage and corresponding improvement measures:

  1. Overly long steam heating time, and excessively high temperatures, leading to burnsFor this situation, we can improve through the following solutions:
    • Control the temperature by reducing steam pressure and shortening heating time to prevent burns.
  2. Rapid cooling speed, leading to water damageFor this problem, we can improve through the following solutions:
    • Increase the temperature of the cooling water, reduce the amount of cooling water, and extend the cooling time; try to use vacuum cooling as the main method, with auxiliary water cooling, to control the cooling speed.
  3. Insufficient or unevenly distributed feedFor this problem, we can improve through the following solutions:
    • Check if the EPSE filling gun is blocked, if so, you can increase the filling pressure, extend the filling time; increase the clearance of the EPS mold closing; and use raw materials with smaller particle sizes.
  4. Insufficient mold locking force, leading to sudden leakage of the mold sealing surface after heatingFor this problem, we can improve through the following solutions:
    • Prevent the mold sealing surface from suddenly leaking after heating by increasing the mold locking force.
  5. Excessive foaming ratioFor this problem, we can improve through the following solutions:
    • Control the size and density of the expanding by adjusting the expanding ratio.

Shrinkage in EPS mold manufacturing

To understand shrinkage in EPS mold manufacturing, consider the following key points from the article:

  1. EPS products typically experience shrinkage between 0% and 0.3%, which varies based on material characteristics, demolding temperature, product density, and thickness.
  2. In scenarios involving high demolding temperatures and thicker products, EPS may expand rather than shrink.
  3. Mold designs should compensate for this shrinkage by slightly enlarging the mold dimensions, typically by about 0.2%.
  4. For aluminum molds used in casting, the shrinkage can be around 1.1-1.2%, and wood molds may need to be enlarged by 1.3-1.8% depending on various technical conditions.

Photo

How to solve EPS foam product surface shrinkage for EPS shape molding machine?
How to solve EPS foam product surface shrinkage for EPS shape molding machine?

Leave a Message