修改图片名称

EPP pre-pressurization system work principle

The EPP pre-pressurization system involves feeding high pressure compressed air into the Pre-Pressurization tank and injecting additional air into the EPP particle bubble holes to increase internal pressure, resulting in better fusion and surface appearance of the EPP product and lower shrinkage after forming. The process includes gradually pressurizing EPP particles with compressed air, diffusing the compressed air into the interior of the EPP particle bubble holes, and reducing the pressure to a holding pressure until the EPP is produced.

Description

EPP pre-pressurization system which involves feeding high pressure compressed air into the Pre-Pressurization tank and injecting additional air into the EPP particle bubble holes to increase internal pressure. This results in a better fusion and surface appearance of the EPP product and lower shrinkage after forming.

How it works:

This is done by feeding high pressure compressed air into the Pre-Pressurization tank and creating a state of overpressure by injecting additional air into the EPP particle bubble holes through the diffusion of the compressed air.

Purpose: To increase the internal pressure of the EPP bubble holes so that the EPP has a greater foaming force, resulting in a good fusion and surface appearance and a lower shrinkage of the product after forming.

Basic process:

The EPP particles are first added to the Pre-Pressurization tank and then gradually pressurised with compressed air from zero to a specific pressure. In this over-pressurised environment, the compressed air is diffused into the interior of the EPP particle bubble holes. The compressed air pressure in the pre-pressure tank will remain constant for a certain period of time. The pressure in the Pre-Pressurization tank tank is then reduced to a holding pressure. This pressure is maintained until the EPP is produced.

Suit for EPS machine

Photo

修改图片名称

Leave a Message