Description
The working principle of crushing
The HM-200 EPS hot melting machine or EPS compactor machine uses four axes of crushing blades, double rows of parallel blade axes fixed symmetrically to the blades, which are staggered on the two-axis blade axes, with the blades on each axis evenly arranged in the same direction by means of a calculated method. For HM200 and HM100 ,each pair contains one axle with 12 blades and another with 11 blades. Each blade has three claws on top.

The first and last blades on each axis are arranged at an angle of 90 degrees. When the twin-shaft crushing blades start working, the two parallel blade axes rotate in different directions of rotation, creating a wave control so that the material moves downwards at a constant speed and, after being cut by the cutting blades, is turned into smaller pieces. the four-shaft crushing blades in the EPS hot-melt machine turn the EPS material into smaller volume pieces which then pass through the screen. The material that cannot be crushed again through the screen will eventually be filtered out through the screen.
In the EPS hot melting machine, the material is pushed by a high-speed rotating screw into a heated barrel. The screw in the main machine conveys and heats the material to a hot melt state, then extrudes and cools it through a mold to produce regular squares that are easier to store and transport.
For the Styrofoam compactor machine, the material is pushed by a high speed rotating screw to a hydraulic station. The screw of the main machine conveys the material forward and the hydraulic station compresses it downwards to a regular rectangular block, which is easier to store and transport.
Photos
Leave a Message





